Raymond mill is mainly composed of main engine, fan, analyzer, finished cyclone separator and air duct. The main unit is composed of blade, grinding ring, frame, inlet volute, cover, etc. When the Raymond mill is running, the material enters the machine through the housing. Raymond machine is sold. After entering the machine, the grinding roller swings outward and presses on the grinding ring. The blade feeds the material between the grinding roller and the grinding ring. The rolling and rolling of grinding rollers can be used to crush and grind materials.
The ball mill equipment consists of a rotating device, a lattice ball mill, two bins, and outer gear transmission. The material enters the warehouse of the mill. There are many steel balls of different specifications in the warehouse. The centrifugal force generated by the rotation in the cylinder drives the steel ball to a certain height, which will cause heavy blow and grinding of the material. After the material passes through the rough grinding of the bin, it enters the next box and is ground. There is also a steel ball and a flat liner.
Raymond mill is an energy-saving grinding equipment. Raymond Mill is not a panacea. He has a certain range of use. Not all ore chemical materials can be manufactured with Raymond mills. Raymond powder is used for powders with humidity lower than 6% and hardness lower than 9.3, which is non-flammable and explosive. Under normal circumstances, the production efficiency of Raymond mills is considerable, but the production efficiency of Raymond mills is not constant. In actual work, in the normal operation process, master the correct method for better maintenance. Maintenance, mastering certain operation skills and preventive measures will definitely improve the production efficiency of Raymond Mill.
In addition to the factors of Ley Leimong's own grinding, some objective factors will also have a great impact. Here are four brief introductions. Under normal circumstances, the higher the hardness, the lower the output, the higher the hardness of the material, the lower the production efficiency of the Raymond mill, and the wear of Raymond mill components will increase. The higher the viscosity of the material, the higher the adsorption capacity and the greater the possibility of not being selected by the wind, reducing the efficiency of Raymond mill.
Material humidity: Raymond mill is suitable for products with humidity lower than 6%. After grinding, materials with high water content will stick to the inside of the Raymond mill and cause blockage during transportation, which will obviously affect the efficiency of the Raymond mill.
Material composition: The normal use of Raymond mill can produce a fineness between 80-325 mesh. If the material contains more fine powder, it will stick to the inner wall of the Raymond mill. Here, a vibrating screen is first used to filter out the size suitable for Raymond milling machine powder.